Licensed & Insured, in Madison and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Madison
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (608) 292-2031 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Madison and surrounding areas · On-site visits included · Free estimate within 24h
Madison Metal Roofing is a team of local certified professionals based in Madison. We respond quickly in Madison and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (608) 292-2031⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“We had standing seam installed on our 2,400 sq ft ranch and the crew knocked it out in three days flat. The seams are dead straight and they hauled away every last scrap of the old shingles.”
Standing Seam Metal Roofing
“Found water staining on our ceiling after that big storm and these guys tracked it to a failed flashing detail around the chimney. Fixed it in one visit and charged exactly what they quoted.”
Metal Roof Leak Repair
“Didn't want the mess of a full tear-off, so we went with the retrofit over our existing shingles. Crew of four, done in two days, and you'd never know there were two layers up there.”
Metal Roof Over Shingles (Retrofit)
“Our barn roof was backing screws out all over and starting to leak at the washers. They replaced the bad fasteners and re-seated the panels, and it's been bone dry through two heavy rains since.”
Screw Replacement & Re-Fastening
“Got snow guards put on before winter because the sliding snow off our metal roof was piling up right at the back door. Install was quick and tidy. Only gripe is scheduling took a couple weeks longer than I expected.”
Snow Guards & Ice Protection
“Had them out for a full inspection on a house we were buying and they gave me a detailed written report with photos of every issue. Saved me from a nasty surprise after closing.”
Metal Roof Inspection
“Went with stone-coated steel to keep the shingle look but get the metal durability, and honestly it looks better than I pictured. The crew was respectful, kept the yard clean, and walked me through everything at the end.”
Stone-Coated Steel Roofing
“Full replacement on our 1970s house and they handled the tear-off, new panels, and gutters all in one project. Communication was a little spotty mid-job, but the finished roof is solid and the cleanup was spotless.”
Metal Roof ReplacementReal photos of our work in Madison · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam metal roof installation | Starting at $8/sq ft | Includes tear-off, ice-and-water shield, concealed fasteners, and trim; pitch and dormers move the price. |
| Exposed-fastener ribbed panel installation | Starting at $6/sq ft | Includes screw-down panels and trim; best value on barns and simple gable roofs. |
| Metal shingle or stone-coated steel installation | Starting at $10/sq ft | Includes stamped or granule-coated panels; roof complexity and HOA profile rules affect the rate. |
| Copper and specialty metal installation | On estimate | Needs an on-site look for soldered seams, patina, and accent scope before we quote. |
| Travel | Included | In Madison and surrounding Dane County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam panels, standard gable | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard flashing on an accessible roof. |
| Steep or cut-up roof | Starting at $13/sq ft | Adds labor for pitch, valleys, and multiple penetrations common on older Madison homes. |
| Standing seam over existing shingles | On estimate | Depends on deck condition and existing layer count; we inspect before quoting a retrofit. |
| Snow guards and ice protection | On estimate | Priced per linear foot and layout; required over entries and walkways on steep slopes. |
| Travel | Included | In Madison and surrounding Dane County areas, no separate call-out or mileage fee. |
| Estimate | Free | On-site look and written scope within 24 hours at (608) 292-2031, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener replacement | Starting at $9/sq ft | Full tear-off, new underlayment, corrugated or ribbed panels, standard flashing included. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, premium panels, ice-and-water shield, new ridge and drip edge. |
| Metal shingle or stone-coated steel | Starting at $16/sq ft | Stamped or granulated panels for historic or HOA-restricted homes, full tear-off included. |
| Complex or large-scale job | On estimate | Steep pitch, multiple valleys, or heavy deck repair needs an on-site look first. |
| Travel | Included | In Madison and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam retrofit over shingles | Starting at $7/sq ft | Includes slip sheet, clips, panels, and trim; price rises with roof pitch and number of penetrations. |
| Exposed-fastener panel retrofit | Starting at $5.50/sq ft | Corrugated or ribbed panels over purlins; best for barns, sheds, and simple gable roofs. |
| Metal shingle or stone-coated steel retrofit | Starting at $9/sq ft | Textured panels that mimic shake or tile; cost reflects material complexity and trim work. |
| Complex or large-scale retrofit | On estimate | Steep pitches, multiple layers, historic district requirements, and heavy flashing work need an on-site look. |
| Travel | Included | In Madison and surrounding Dane County communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and repair | Starting at $450 | Includes water testing, entry-point tracing, and a targeted fix on an accessible roof area. |
| Fastener and washer replacement | Starting at $650 | Covers pulling backed-out screws and installing matched fasteners with new EPDM washers. |
| Flashing rebuild at chimney or skylight | Starting at $850 | Removes old caulk-and-hope details and rebuilds the flashing with new metal and proper laps. |
| Hail or ice-damaged panel replacement | On estimate | Panel count, finish matching, and roof pitch determine the scope, so we look before quoting. |
| Travel | Included | In Madison and surrounding Dane County communities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic leak inspection and minor repair | Starting at $450 | Includes tracing the leak, attic check and a straightforward fastener or seam repair. |
| Fastener replacement run | Starting at $650 | Replaces failed gasketed screws along a leak line; price rises with roof height and pitch. |
| Flashing rebuild (chimney or skylight) | Starting at $850 | Rebuilds the flashing detail with new metal; complexity of the penetration moves the number. |
| Ice dam correction and snow retention | On estimate | Eave ice barrier, ventilation and snow guard work needs an on-site look before quoting. |
| Emergency tarping after storm | On estimate | Quoted by roof size and access; priority scheduling after hail or wind events. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor re-fastening (residential) | Starting at $750 | Covers a typical single-story roof with a moderate count of loose screws and easy ladder access. |
| Full-slope re-fastening | Starting at $1,200 | Replaces every fastener along one or more slopes where the failure is systemic, not isolated. |
| Barn, shed, or agricultural building | On estimate | Large roof area and high fastener counts need an on-site count before we quote a number. |
| Purlin repair add-on | Quoted per location | Rotted or split purlins behind stripped holes need reinforcement before new screws go in. |
| Travel | Included | In Madison and surrounding Dane County communities, with no separate call-out or mileage fee. |
| Estimate | Free | We walk the roof and quote on site, with response within 24 hours at (608) 292-2031. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple outbuilding | Starting at $5.50/sq ft | Installed with underlayment, closures, and standard screw pattern on a straightforward garage or shed. |
| R-panel roof, home or workshop | Starting at $6.75/sq ft | Includes panel layout, ridge and sidewall flashing, and penetrations; pitch and height raise the rate. |
| Tear-off and deck repair | On estimate | Old layers, rotted decking, and disposal are priced after we see the structure and the layer count. |
| Re-fastening and repair | Starting at $450 | New screws, closures, and resealing on an existing panel roof; rusted or stripped fasteners add labor. |
| Travel | Included | In Madison and surrounding Dane County cities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement | Starting at $9/sq ft | Includes tear-off, underlayment, shingle panels, and standard flashing; pitch and deck condition move the rate. |
| Metal shingle installation over existing shingles | Starting at $8/sq ft | Retrofit over a sound roof, subject to local code limits on existing layers and deck inspection. |
| Stone-coated steel shingle upgrade | Starting at $11/sq ft | Heavier textured finish with Class 4 impact rating; material grade and profile complexity raise the price. |
| Complex or historic-district roof | On estimate | Dormers, turrets, steep pitches, and design review require an on-site look before a firm number. |
| Travel | Included | In Madison and surrounding Dane County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof install | Starting at $9/sq ft | Includes tear-off, underlayment, panels and flashing; steeper pitch and dormers raise the rate |
| Shake or slate profile upgrade | Starting at $11/sq ft | Premium textured profiles cost more than standard finishes; complex hips and valleys add labor |
| Snow guard installation | Starting at $450 | Bars or pads added to hold snow; roof height and linear footage drive the final price |
| Storm damage panel replacement | On estimate | Hail or wind damage needs an on-site look to match panels and check flashing |
| Travel | Included | In Madison and surrounding Dane County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Porch or bay window copper roof | Starting at $20/sq ft | Includes flat-lock copper pans, soldered seams, and new wall flashing; access and curve add cost. |
| Turret or curved detail fabrication | Starting at $28/sq ft | Includes field measurement, shop fabrication, and dry-fit; steep pitch and tight access raise the rate. |
| Full architectural copper or zinc roof | On estimate | Includes deck repair, ice and water shield, panels, and custom flashing; scope needs an on-site look. |
| Flashing and detail repair | Starting at $650 | Includes opening the detail, new soldered flashing, and water test; chimney or valley work adds time. |
| Travel | Included | In Madison and surrounding Dane County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Porch or garage roof coating | Starting at $2.50/sq ft | Includes wash, rust spot treatment, primer, and one finish coat on a simple low-slope roof. |
| Residential full roof coating | From $3.25/sq ft | Includes fastener check, seam sealing, rust converter, primer, and two-coat system. |
| Barn or agricultural roof coating | On estimate | Heavy rust, large square footage, and access across farm lanes need an on-site look first. |
| Rust treatment and spot repair | From $450 | Targeted rust conversion and primer on problem panels before a full coating is scheduled. |
| Travel | Included | in Madison and surrounding Dane County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (608) 292-2031, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney flashing rebuild | Starting at $600 | Includes apron and counterflashing bent in-house; price rises with chimney height and access |
| Skylight curb re-flash | Starting at $650 | New curb metal and sealant joint; higher for steep pitch or multiple skylights |
| Valley or dormer flashing | Starting at $900 | Opens the valley and re-laps courses; rises with rotted deck or standing seam profile |
| Ice dam and eave upgrade | On estimate | Scope depends on roof length and existing underlayment condition, so an on-site look is required |
| Travel | Included | in Madison and surrounding Dane County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style snow guards, single roof run | Starting at $1,200 | Covers guards on one high-risk run plus eave inspection; pitch and panel profile move the price. |
| Bar guard system, full roof edge | Starting at $1,850 | Continuous bar across the slide zone; roof length and access below are the main cost factors. |
| Eave ice-dam protection | Starting at $950 | Ice-and-water membrane and edge detailing at the eaves; linear footage and gutter condition affect the total. |
| Rail system, commercial or agricultural | On estimate | Large panel runs and high-slope roofs need an on-site look before we quote a number. |
| Travel | Included | In Madison and surrounding Dane County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage assessment | Free | Full roof, flashing, and attic inspection with photo documentation and a written repair-versus-replace recommendation. |
| Minor storm repair (flashing, fasteners, seals) | Starting at $350 | Covers isolated flashing, fastener, and seal repairs; price moves with roof pitch and access. |
| Panel and section repair | Starting at $850 | Includes panel replacement and re-flashing; matching panel availability and damage extent drive the final number. |
| Widespread storm damage repair | On estimate | Multi-plane damage, partial replacement, or insurance-scope work needs an on-site inspection before pricing. |
| Emergency tarping and water control | Starting at $250 | Temporary protection for active leaks; urgency and roof height are the main cost factors. |
| Travel | Included | In Madison and surrounding Dane County cities, with no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal roof inspection (standard) | Free estimate | On-roof walk, fastener and seam check, flashing review, and written photo report included |
| Metal roof inspection with attic review | Starting at $250 | Adds attic-side moisture and decking inspection, priced by roof size and access difficulty |
| Pre-sale or insurance documentation inspection | Starting at $350 | Written remaining service life estimate and photo package, priced by panel count and report depth |
| Storm or hail damage assessment | On estimate | Requires on-site mapping of dents, seam distortion, and flashing impact before a number is given |
| Travel | Included | in Madison and surrounding Dane County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (608) 292-2031, no obligation to book the inspection |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum K-style with upgraded hangers | Starting at $9/linear ft | Includes on-site forming, heavy-duty hangers, and standard downspouts; gauge and profile move the price |
| Heavy-gauge steel half-round with custom brackets | Starting at $18/linear ft | Thicker metal and closer hanger spacing for steep standing seam; historic profiles cost more |
| Heated cable at eaves and valleys | Starting at $12/linear ft | Cable, clips, and a dedicated circuit tie-in; run length and roof access drive the number |
| Oversized downspout and additional leaders | On estimate | Priced per outlet and run after we measure the actual roof drainage area on site |
| Travel | Included | in Madison and surrounding Dane County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site walk of deck, purlins, and fasteners with photos and a written repair or replacement scope. |
| Fastener replacement and re-fastening | Starting at $850 | Corroded screw replacement and closure strip renewal on exposed fastener barn and shed roofs. |
| Leak and flashing repair | Starting at $450 | Ridge, eave, and penetration flashing repair priced by the number of leak points found. |
| Panel replacement or new installation | On estimate | Priced by square footage, pitch, panel gauge, penetrations, and whether we remove or recover. |
| Travel | Included | In Madison and surrounding Dane County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (608) 292-2031, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Madison want a crew that understands this climate, not a call center reading a script. Madison Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofing on homes and outbuildings across Madison, Middleton, Fitchburg, Sun Prairie, Verona, and the surrounding Dane County area. We work on steep pitches, roofs tucked under heavy oak and maple cover, and exposed ridgelines that take the full force of winter wind off Lakes Mendota and Monona.
That local experience matters because this region carries a large stock of aging exposed-fastener roofs, many now 15 to 30 years old, where sealing washers are drying out and fasteners are backing out. From Victorian and Italianate homes near Mansion Hill to Craftsman bungalows on the isthmus and newer two-story builds in Waunakee, we match the system to the structure. Start with a free estimate and we will tell you plainly what your roof needs.
Most metal roof leaks we see in Madison are not mysterious. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, letting water past the screw head. The second is seam separation from thermal movement, where panels expand and contract through freeze-thaw cycles until seams open. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at penetrations, while summer thunderstorms and tornado-driven wind lift and peel panels, and fallen limbs puncture them outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a ceiling stain, sheathing may be rotted and insulation soaked. Our metal roof leak repair team finds the actual source, not just the stain. The honest call is often repair: a full screw replacement with new fasteners and sealing washers frequently restores a watertight roof for a fraction of replacement cost. When seams, panels, or decking are too far gone, we say so.
If you have an active leak, call (608) 292-2031 and we will schedule an inspection. We also handle metal roof repair for wind-lifted panels, punctures, and failed flashing, and we will give you a straight repair-versus-replace recommendation before any work begins.
We install the full range of metal systems. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, making it the premium choice for longevity and clean lines. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. We also offer Metal Roof Over Shingles (Retrofit) when the deck is sound, and tear-off when it is not. Matching the system to your home and budget is the whole job.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof rather than a ballpark.
After a storm, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and historic district or HOA design review can affect panel profile and color choices. We do not state thresholds or fees as fact.
Requirements vary. Always verify with the Madison building or planning department before starting your project. For documentation or a free estimate, contact us and we will walk you through what we can and cannot do.
Ready to get started? Madison Metal Roofing serves in Madison and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Madison · Response within 24h · No commitment · ☎ (608) 292-2031
Your Free Quote Request